[Polymer] Stretch-induced Structural Transition of Linear Low-Density Polyethylene during Uniaxial Stretching
under Different Strain Rates
Recently, the doctoral student Shengyao Feng et al. in our laboratory published a special paper titled “Stretch-induced Structural Transition of Linear Low-Density Polyethylene during Uniaxial Stretching under Different Strain Rates” on Polymer with the guidance of Professor Liangbin Li and Postdoctoral Yuanfei Lin.
![](/_upload/article/images/b7/46/bf8458c24fdbab6494d1676a54b9/c046e01f-2757-431a-880b-efd6a2a7de82.jpg)
The structural evolutions of linear low-density polyethylene (LLDPE) are investigated by in-situ synchrotron radiation wide-angle X-ray diffraction (WAXD) during tensile deformation over a wide strain rates range from 0.005 to 250 s-1. The phase transition mechanism is discussed by combining the phase diagram in 2D true stress (σtrue)-strain rate ( ε) space with the evolutions of several micro-structural parameters, such as the crystallinity (χc), crystal sizes (L110, L200) and lattice parameters (aO, bO). The true stress space can be roughly divided into three regions by two critical true stresses at the onset formation of the monoclinic (σM-onset)and the hexagonal (σH-onset) crystals. In region I where only orthorhombic crystals exist, lattice distortion under the effects of stress plays a dominant role. In region II, the martensitic transformation from orthorhombic to monoclinic crystals occurs and monoclinic crystals load the main tensile stress. In region III, stress-induced melt recrystallization occurs and hexagonal crystals appear. In addition, the effects of strain rate on the stress-induced melt crystallization and lattice deformation are also discussed. This study on LLDPE films might aid to deepen the understanding of structural evolutions during real post-stretching process.
Keywords:linear low-densitypolyethylene; strain rate; structural evolution