FLC Electronics AB A800DI Dual Channel HV Amplifier with Phase Inverter:
This amplify can be used for MEMS actuation, EO-modulators, PZT (piezo) positioners, ultrasonics, liquid crystals, OLEDs and many other applications.
Instructions:
Single channel mode: Use BNC connector to connect input voltage to voltage amplifier through IN interface. Then through the OUT interface back to the original circuit can achieve 100 times the input signal amplification
Dual channel mode: 200x input signal amplification can be achieved by connecting the two channels as shown in the figure.
Precautions:
The amplitude of the input signal should normally be kept within ±4 V. The input protection network limits the signal amplitude delivered to the power amplifier to a safe value. It also effectively cuts accidental spikes and overshoots. However, large and prolonged overvoltage at the input may blow the microfuse in the input protection circuit.
The amplifier cannot be used to drive a purely inductive load
Using high-voltage equipment carefully!
Summary of technical data:
Frequency response:
